Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
page

Armor Renew Wood & Concrete Resurfacer



Armor Renew is a specially formulated environmentally-safe textured liquid coating that you apply to virtually any concrete surface to bring it back to life, and avoid expensive replacement. Armor Renew is not a paint or stain, but a 1-part (no mixing) water based thick coating that is designed to be applied to wood or concrete surfaces with surface imperfections and damage caused by moisture, UV, cracks, mold and discoloration. Acts a liquid resurfacing coating that ’sits’ on the surface but adheres tenaciously (unlike stains or paints that soak in, and epoxies that are not UV stable) and provides a brand new slip-resistant surface. Gives the effect of replacing at a fraction of the cost. Great for patios, stairs, walkways, wood or concrete decks, balconies, etc. Each gallon covers approximately 50-100 square feet per coat. Lighter colors and older/more porous wood can yield less coverage. 2 coats are required for proper performance and warranty coverage. Please note that it is mandatory to use our special textured foam roller pad to apply (see below). Lifetime satisfaction warranty. ‘Smooth’ high solids acrylic version is available for painting wood uprights,stairs and between boards.  Available in 20 gorgeous colors (color charts available).

Armor Renew Wood Primer (see related items below) is required for all applications to wood in order to obtain the lifetime warranty.

Use our Flash Bond Prime for composite (Trex type) decking.

ArmorRenew Sample Kit Contains:

  • (1) QUART ARMOR RENEW COATING
  • (1) 3″ ROLLER HANDLE (The handle can also be attached to a broomstick for ease of use. Test out the product to see how truly fantastic it is!)
  • (1) 3″ ARMOR RENEW ROLLER PAD
  • (1) 4″ PAINT TRAY

Not recommended for areas that have standing water or where water does not drain properly. Contact our office for coatings for these types of areas. Pail contents 3.75 gals if not tinted, 4 gals with tint.

PLEASE NOTE THAT ARMOR RENEW IS MADE IN BATCHES. COLORS MAY VARY FROM BATCH TO BATCH SO PLEASE MAKE SURE TO ORDER ENOUGH MATERIAL FOR YOUR ENTIRE PROJECT SINCE REORDERS MAY SHOW COLOR VARIATIONS. (If this color shift does occur, it can be corrected by putting on a coat of the Smooth Version).

 

Videos


--------------------------------
Guestbeat.com Notice!
Audience discretion is needed, Read TOS.
Submit Guest Post / Read Latest / Category List
App & Rate-Us / Subscribe Daily Newsletter (FREE)

    Add a Comment

    Get Mobile App